5 Ways to Set Up a Wifi Router at Home or Office

Here we will explain about how to set up a complete Wifi Router as a result it is needed to put a deep understanding for you.

Having a wifi connection at home or at work will certainly create access to computer networks, either local or internet, as more convenient and hassle-free than using cables.

The absence of cables dangling from modem to device can certainly give a neat impression in rooms in the house or office, especially if the location between devices are far apart.

Therefore, the use of Wifi Router becomes very crucial, which is added if the quality of the router used is good quality so that it can reach distant locations even though it is blocked by walls or other barriers.

Here we will provide steps based on how to set the perfect Wifi router as a result it is expected that you can try it and get optimal results from the router device owned. Step 1: Router Placement

The best place to place your Wifi router is in an open area in the middle of your residence, because it will provide the most even range of frequency.

Even so, for most people this will be difficult to do, because you must connect a Wifi router to a device provided by your Internet service provider (ISP), whose location is able to bhineka at the time paired by the provider (and will usually be placed in the wall).

If you can’t put a Wifi router in the middle of your home, at least try to avoid putting it in a closet or enclosed space that will be able to narrow the range of the signal.

Then if the modem location can not / not want you to move, try using a UTP cable / LAN cable that is rather long so that it is able to connect between modems using Wifi routers that have been placed in a synchronous location using ideals. Step 2: Connect the Router with the PC/Laptop

Entering this term will be able to vary between many types and brands of routers, but usually you are not able to connect via Wifi, as a result you have to connect the wifi router to the error of one device, whether it is a laptop or PC, using a LAN cable.

So there are 2 cables used here, the first is to connect between internet modems using WIifi routers, the second is between Wifi routers with PC or Laptop devices.

The cable from the modem will generally be connected in a WAN port contained in the Wifi router (the location is usually separate itself), & the cable based on the router to the device will be connected through one of the LAN ports available in the router.

Next turn on the router and modem, then check the guidebook to find out the local address of your Wifi router, for example http://192.168.1.1 or http://192.168.0.1 or others, then open the address on the PC or laptop browser connected to the wifi router via LAN.

Later you are asked to enter the default username &password of the router, which will usually be contained in the playbook, or can try between the username and password using “admin” without a quote sign, or clear the username and fill in the password using “admin” without quotation marks. Step 3: Router Configuration

For this next stage you need to set up a router so that it can connect to the ISP’s internet modem located at home or at your workplace.

This setting will be for every ISP, and you can ask them, but in general here there is no need to do any more settings unless your router can not read the settings automatically.

For example in the image above, which uses a D-link & Internet router provided by First Media, then in the setup presentation the most important is the WAN Access Type option has been selected DHCP client & option “Attain DNS Automatically” has been checked (round blue).

If the Setup dish is not found try to find the menu “Network”. Step 4: SSID configuration

Next you need to set the Wireless configuration so that the Wifi router can be used without wires again to the device, and set what is called using SSID (Service Set Identifier).

Make sure the option “Enable SSID Broadcast” has been checked like the picture above, then specify a name based on the SSID to make it easier for you to choose hotspot frequency based on this router, select mode 802.11b / g / n or available on your router, specify bandwidth, select WPA2 AES in Security Option, and fill in the Pre-Shared Key with the password to be used to access the hotspot from your Wifi router,Then click “Apply”. Step five: Test Router Connection

The last step is of course to test whether the hotspot of the Wifi router is already capable of use or not, using how to try to find out if the SSID name is available on the list of hotspots caught on your device.

If using a PC, make sure whether there is a Wifi Receiver / Wifi Dongle that is plugged in & installed in your computer, while if using a laptop, smartphone, or tablet generally no longer need to use additional devices.

Then select the appropriate hotspot using the SSID name you created, then add the appropriate password using what you fill in the Pre-Shared Key column, and wait until the connection is successfully connected.

After that you can test whether the internet connection can be used or not in your device.

If not, some things that need to be checked include: Make sure the internet modem & Wifi router is on, Make sure the password entered to access the hotspot is not mistaken, Make sure the Wifi router is still working properly Make sure the internet connection is not a problem.

Hopefully our information about How to set up a Wifi Router will be able to help you get to know and explore the topic we provided in this article.

Leave a Reply

Your email address will not be published. Required fields are marked *