How to Set A Router TP-Link TL-WR840N Into An Access Point – HideSSH

Andika Putra S.Kom FollowSaya someone Linux System Administrator & also wrote poly tutorial on VPNs, VPS, RDP, Tunneling Linux, Cloud, & Open Source.

Access Point in TP-Link TL-WR840N, Type Router Router TP-Link Multifunctional TL-WR840N based on gw one of the cheap networking devices, many users and famous among indoor routers in addition to tent routers & Totolink

In this tutorial I will give a complete guideline on how to configure router TP-Link TL-WR840N into access point using several modes namely Router, Access point, Range Extender & WISP

TP-Link TL-WR840N Antenna 300Mbps Wireless with 5dBi omni antenna, 1 WAN port, 4 LAN ports, and IPTV features, Products based on China with approximately 142,000 beautiful and best quality with plastic

This router is very helpful for operational office & home because it has many functions including being able toRouteraccess pointRepeaterwisp (Router connected from wireless Broadband ISP).Complete Guide how to set up a TP-Link TL-WR840N router

make sure you put on the LAN cable in the TP-Link WR840 WAN Port, to make it easier in the Tplink configuration process

Read also: How to Register a New Account in ScribdHow to Set TP-Link As An Access Point

The main function of Access Point mode is to share signals from internet sources derived from modems or wireless routers based on ISPs using LAN cables.

First of all make sure to connect your laptop computer or through your MOBILE phone to the TP-Link WR840 Wifi network so that it can enter the main configuration menu page of TplinkOpen the Broswer App (Google Chrome, Uc Broswer)open address 192.168.0.1 (IP Gateway TP-Link).To login default TP-Link WR840N

after successfully logging into the configuration dish, follow the process belowThen click Next on the Quick Setup pageSelect Access Point ModeCreate the desired SSID/Wifi name, then NextThen in Networking Settings, LAN Type: dynamic or Static IP

it will adjust to the IP network used by the origin of the internet,then click Finish to save settingsWait for the Reboot process to complete

Test using a connection to a WiFi network that has just been created if the status is Connected should already be usable to access the Internet.Video Guide How to Set TP-Link WR840N As An Access Point

How to Create an SSH Key in PuttyGen For VPSHow to Set TL-WR840N As a Router

Router mode allows having a configuration that is not in sync with the main LAN network segment and network by creating a LAN network or connection not the same as the new IP address.

Make sure the LAN cable from the modem has you connected to the WAN port on the AP TP-LINK TL-WR840N and then follow the guidelines belowAfter successfully logging into the initial presentation of TP-LINK TL-WR840NThen click Next on the Quick Setup pageSelect Dynamic IP On Mac Clone just select No, I do NOT need clone mac addressCreate the desired SSID/Wifi name and Password, then Nextthen press Save to saveWait for the Reboot process to complete

Trial using a connection to a recently formed WiFi network if the connected status should have been usable to access the Internet.How to Set TP-LINK TL-WR840N as Range Extender

In Range Extender Mode i resulted in the previous Access Point Router as a primary wifi frequency reinforcement point, so its function becomes a wifi frequency catcher that already exists.After successfully logging into the TP-LINK TL-WR840N Initial menuThen click Next in the Quick Setup pageselect Range Extender Mode & Select NextSelect the Acces Point List to be caught,please select /connect to your wifi network by clicking ConnectThen enter the primary wifi password & give the name wifi extender,

You are able to provide the appropriate name using primary wifi or not aligned name by specifying Customize on Wireless Name of Range Extender. Then press NextFor Network Settings select Smart IP (DHCP)then press Save to saveWait for the Reboot process to complete

Now you have succeeded in making Repeater to expand the wifi network at home Scout Video Setting TP-LINK TL-WR840N as Range Extender

Read also : Complete Guide how to install Runcloud on VPS UbuntuHow to Set Up As WISPAfter successfully logging into the initial presentation of TP-LINK TL-WR840NThen click Next in the Quick Setup pageThen select Dynamic IP Furthermore, on the next page you are able to specify a Wireless or WiFi network to connect to the available.Enter the WISP network password and the new network WiFi name.Enter the wifi password you want to connect and create a local wifi (ssid) networkthen press Save to save wisp configurationWait for the Reboot process to complete

How to Set a Multifunctional TP-Link Router (TL-WR840N) Becomes an Access Point is very easy for beginners on the network and there is also a guidebook

Please Note the use of channels in access point mode so that there is no interference / noise in your wifi. If you feel not obvious and understand can ask in the comments field

Leave a Reply

Your email address will not be published. Required fields are marked *